Stainless Steel Hiking Thermos 1.5 Litre

8331658

QUECHUA

Write the first review
Made for
Large volume (1.5 litre), cup included, retractable handle. The best insulated bottle.

Avantage
IsothermalStarting temperature 95°C: 83°C after 6hrs, 74° after 12hrs, 60° after 24h.
Ease of useDouble opening: Wide or quick to pour. Handle, cup included. Stainless steel.
Easy maintenanceEasy to clean thanks to its removable mouthpiece. Stainless steel inner wall.
Easy transportRetractable handle for transport and ease of pouring.
DurabilityDouble stainless steel int. wall con.18/8 (304) with an air gap between the two.
Guarantee2 Years
Technical Information

1
Advice to maximise the performance of your isothermal bottle.
"Fill the bottle with boiling water for 5 minutes. Then replace the water with your beverage. Close the flask. The fuller the bottle the better it keeps its contents cold or warm."
2
Functions
Lid with a large opening but also with a fast opening system allowing you to pour quickly without losing heat.
3
Maintenance advice
Wash by hand, not in the dishwasher. Rinse in clean water, then leave to dry with the cap open.
4
First use
Rinse the entire product 3 times with clear water before using for the first time.
5
Materials and regulations
Our products and materials meet current food contact standards. They are Bisphenol A (BPA) free, in compliance with current French regulations.
6
Weight and dimensions
Volume: 1.5 litre Dimensions : Ø 12,5 cm x 29 cm Weight : 980 grams Also in: 0.4L / 0.7L / 1L / 1.5L
Characteristics
MaterialStainless steel

Volume1.5 litre

DimensionsØ 12.5 cm x 29 cm

Weight980g

Available in0.4L / 0.7L / 1L / 1.5L
Info Concept/ Technology
Composition
Bottle/Body : 90.0% Stainless steel, Bottle/Body : 7.0% Polypropylene (PP), Bottle/Body : 3.0% Acrylonitrile butadiene styrene (ABS) Cap : 78.0% Polypropylene (PP), Cap : 20.0% Stainless steel, Cap : 2.0% Acrylonitrile butadiene styrene (ABS) Joint/Gasket : 100.0% Silicon

Test Product
Our isothermal products are tested using the same protocol: Water at 95°C is placed in the product, which is then closed. We then measure the temperature drop of the water after 6, 12 and 24 hours.

Stock Advise
Wash and dry before storing. Store in a clean and dry place.