Stainless steel isothermal food box (with 2 food compartments) 2 L

8246377

QUECHUA

660 000 VND

Stainless steel isothermal food box (with 2 food compartments) 2 L
Write the first review
Made for
In stainless steel, practical with its 2 food compartments included. Retractable handle, large capacity (2 litres).

Avantage
IsothermalStarting temperature 95°C: 70°C after 6 hrs, 56° after 12 hrs, 40° after 24 hrs.
Ease of useLarge opening, screw-on cover, 2 food boxes included. Stainless steel.
Easy maintenanceEasy to clean thanks to its large opening. Stainless steel inner wall.
Easy transportLarge folding handle on the lid.
DurabilityDouble wall construction in 18/8(304) stainless steel w. an air gap btw. the two
Guarantee2 Years
Technical Information

1
Advice for maximising the performance of your isothermal box.
Fill your food box with hot water for 5 minutes then replace the water with your hot food (either directly into the container or in the little boxes supplied.) Close the box. The fuller the box, the more effectively it keeps its contents hot or cold.
2
Features
2 food boxes included (0.35L and 0.65L) allowing you to separate food. WARNING!! For use in the microwave, it is essential to open the boxes. Do not heat in the closed position. Do not leave food for more than 12 hours in the boxes or in the container.
3
Care instructions
Wash by hand, not in the dishwasher. Rinse in clean water, then leave to dry with the cap open. Only the small food boxes may be washed in the dishwasher.
4
First use
Rinse the entire product 3 times with clean water before first use.
5
Materials and regulations
All of our products and materials meet the food contact standards currently in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.
6
Weight and dimensions
Volume: 2 litres Dimensions: Ø 15 cm x 22 cm Weight: 1160g
Characteristics
MaterialStainless steel

Volume2 litres

DimensionsØ 15 cm x 22 cm

Weight1160g
Info Concept/ Technology
Composition
Bottle/Body : 100.0% Stainless steel Inside room : 100.0% Polypropylene (PP) Cap : 100.0% Polypropylene (PP) Joint/Gasket : 100.0% Silicon

Test Product
Our isothermal products are tested using the same protocol: Water at 95°C is placed in the product, which is then closed. We then measure the temperature drop of the water after 6, 12 and 24 hours.

Stock Advise
Wash and dry before storing. Store in a clean, dry place.
    Hiển thị kết quả cho