ILS Boot : 80.0% Polypropylene (PP), ILS Boot : 20.0% Polyurethane (PU) ILS wheels : 100.0% Polyurethane (PU) Upper Part - Main Fabric : 100.0% Polyester (PES) ILS Cuff : 100.0% Polypropylene (PP) Bearing : 100.0% STEEL Brake : 50.0% Rubber - Synthetic, Brake : 50.0% Polyamide 6.6 (PA6.6) Buckles : 50.0% Polyurethane (PU), Buckles : 50.0% Polyamide 6.6 (PA6.6)
We recommend keeping your inline skates in a dry place. After use do not dry near a naked flame or in direct contact with a heat source.
After skating through water, remove the wheels and dry and degrease the bearings. This helps prevent the bearings from seizing up. Be sure to change the brake pad once it has worn down to its limit. We recommend rotating the position of the wheels so they wear down evenly (see instructions). To further improve glide performance, replace the bearings with ABEC 5 or 7 bearings. Care advice is available on the Oxelo YouTube channel.