Made for Strong, simple and highly insulating, the reliable lid opens with a quarter turn, cup included / 0.7 litre.
IsothermalStarting temperature 95°C: 81°C after 6 hrs, 70° after 12 hrs, 55° after 24 hrs.
Ease of useAllows you to pour by partially unscrewing the lid.Cup included.Stainless steel.
Easy maintenanceEasy to clean thanks to the screw top. Stainless steel internal wall.
DurabilityDouble wall construction in 18/8(304) stainless steel w. an air gap btw. the two
Advice to optimise the performance of your insulated bottle.
Fill the bottle with boiling water for 5 minutes. Then replace the water with your beverage. Close the bottle. the fuller the bottle, the better it is at keeping its contents hot or cold.
By partially unscrewing the lid, you can pour the liquid easily, and avoid opening the bottle fully, which would reduce its thermal performance. The cup, which is included, screws onto the bottle to make it easy to carry.
Hand wash then rinse with clear water and leave to dry with the lid open. The bottle may go in the dishwasher, but avoid putting the lid and cup there.
Rinse the entire product 3 times with clean water before first use.
Materials and regulations
Our products and materials comply with current food contact standards. They do not contain Bisphenol A (BPA) in accordance with current French legislation.
Weight and dimensions
Volume: 0.7 litre Measures: Ø 8.3 cm x 26.4 cm Weight: 450 grams Available in: 0.4 L/0.7 L/1 L/1.5 L
DimensionsØ 8.3 cm x 26.4 cm
Available in0.4L / 0.7L / 1L / 1.5L
Info Concept/ Technology
Bottle/Body : 100.0% Stainless steel Cap : 75.0% Polypropylene (PP), Cap : 25.0% Stainless steel Joint/Gasket : 100.0% Silicon
Our insulating products are tested using the same protocol: Water at 95°C is placed in the product, which is then closed. We then measure the temperature drop of the water after 6, 12 and 24 hours.
Wash and dry before storing. Store in a clean, dry place.